SYNERGY 140-2-NO12 - RENOLD 1 3/4 Inch Pitch Synergy LinkA single link with cranked plates pressed onto a bush and roller assemble at the narrow end. A clearance fit connecting pin (No. 128) is fitted at the wide end and is secured by a split pin.

The design of the NU2310 ECML/C3 SKF bearing ensures even load distribution and carries heavy radial loads while maintaining a low cross-sectional height and low friction

The bearing's dimensions are 4x12x5

72 13 B W G Metric

53 04 TN C3 Double Row Angular Contact

72 06 B E CB M 72 Series - Light 30 mm - Bore Size Contact Angle Single Row Bearing with a 40° Contact Angle Optimized Internal Design Universal Bearings

NU 23 09 E T Metric

NU 2 20 E TVP2 C3 Two Flanges on Outer Ring and No Flanges on Inner Ring Light Series 100mm - Bore Size Increased Capacity Design Solid Window Cage Made From Glass Fibre Reinforced Polyamide PA66 Radial Internal Clearance Larger Than Normal

this bearings also has a standard radial internal clearance The bearing's dimensions are 85x130x22

61826 Bearing Steel Thin Section with a Bore Diameter of 130mm Open Type Normal Internal Clearance

This N322-E-M1-C3 bearing is a single row cylindrical roller bearing

This LBE8UUAJ is an Adjustable Type Metric Linear Bushing with Two End Seal

This 18790/18720 bearing is a imperial taper roller bearing