DS18B20 Temperature Sensor ModuleThe DS18B20 Digital Thermometer provides 9 to 12 bit (configurable) temperature readings which indicate the temperature of the device. Information is sent to from the DS18B20 over a 1 Wire interface, so that only one wire (and ground) needs to be connected from a central microprocessor to a DS18B20. Power for reading, writing, and performing temperature conversions can be derived from the data line itself with no need for an external power source.

Low RDS(on)

Colour Yellow & Green Length 5 meter Insulation Type PVC Wire Gauge 22 AWG

resulting in smoother control (less "torque ripple") in a variety of motor control Applications

Low forward voltage

The USB Type C pluggable board includes an integrated LiPo Battery Charging Circuit & Connector and is an excellent solution for developing IoT Applications

Flexible Architecture with 4KB sectors

High efficiency with rated load 75% at 100V AC

It can operate on the temperature range 40°C to 85°C and its insulation resistance is less than equal to 100mohm

Brown for these 22K resistors

0 cable which is the kind that€š¬€ž¢s usually used for printers etc

2k ohm (122) Brand Resistor Chip size 0805 Tolerance 5% Power 1/8W Temperature Range -55°C to +125°C Mounting Type Surface mount No

Operating Current 150mA Contact Resistance <100mΩ Operating Temperature -20°C to 80°C Colour Red and White Pitch 2