PA Pneumatic Vacuum Pump - PA140, PA170 & PA200A state of the art range of ejectors has allowed creating this range of pneumatic suction pumps featuring an excellent ratio between the amount of consumed air and sucked air, as well as the ability to adjust the vacuum level and capacity according to the supply air pressure. These pumps are supplied by compressed air with a pressure ranging from 1 to 6 bar (g), and they can produce a maximum vacuum of 90% and a suction capacity between 15 and 320 cum

RVP 15 and 21 pumps

Vacuum cups with a minimum diameter of 10 mm and maximum diameter of 50 mm can be assembled on these cup holders

check valves are mandatory on all vacuum pumps with lubrication that do not have them built-in

They are naturally also used to handle these same materials

paper or plastic sheets

These direct-drive valves have been specially designed for vacuum and are normally closed

They are provided as standard with a built-in pneumatic energy-saving device

films and whatever needs to be handled with the greatest care

pewter or silver objects

the plant level of vacuum goes below the pre-set minimum value

resistant to wear and corrosion

a check valve and necessary tubing